A P0148 on the 6.0L Power Stroke indicates a fuel delivery error, meaning the injection control pressure or fuel delivery did not match what the computer commanded.
What P0148 means
Fuel Delivery Error is a diagnostic trouble code set when the monitored value falls outside its expected range. On the 6.0L Power Stroke, it narrows the problem to a specific system, and reading it correctly prevents replacing good parts.
Common causes
- High-pressure oil system leak (STC fitting, standpipes, dummy plugs)
- Weak or failing high-pressure oil pump
- IPR valve problem
- Injector or ICP sensor issues
Symptoms you may notice
- Hard starting, especially hot
- Rough running and misfire
- Reduced power
- Related injection-control-pressure codes
How to diagnose it
Because the 6.0L uses high-pressure oil to fire injectors, check injection control pressure and look for leaks in the high-pressure oil system. A system that cannot build or hold pressure, or an IPR that cannot regulate it, sets this code.
How to fix it
Repair high-pressure oil leaks at the STC fitting, standpipes, and dummy plugs, and address a weak HPOP or faulty IPR as needed. Confirm injection control pressure builds and holds. Clear and verify with a hot-start test.
Frequently asked questions
What is a fuel delivery error on a 6.0L?
The injection control pressure or delivery did not match command, usually a high-pressure oil system leak or pump/IPR problem.
Why does it start hard hot?
Hot oil leaks down more easily, so a marginal high-pressure oil system cannot hold the pressure needed to fire the injectors.
Where do I start?
Check injection control pressure and inspect the STC fitting, standpipes, and dummy plugs for leaks.
Need the part?
We stock the parts these trucks need. Shop all 6.0L Power Stroke parts →